Pneumatic Cylinder Output Table Cylinder Thrust Calculation Formula

RIH Pneumatic Provides The Most Comprehensive Cylinder Theoretical Output Force Table And Calculation Methods, Focusing On The Service Of Automation Series Supporting And Solutions.

The Output Force Of The Cylinder Has Nothing To Do With The Length Of The Stroke, Such As:

Pressure 0.5mpa (5.0985811 Kg Force /Cm2 (Kgf /Cm2))

Cylinder Diameter 50mm (5cm)

Cylinder Cross-Sectional Area = 3.14x (5/2)^2=19.63(Cm2)

Therefore, 0.5mpa Theoretical Output = 5.0985811*19.63 = 100.085 (Kg Force) Can Directly Refer To The Following Output Table

But It Is Theoretical Output Only, We Want Actual According To Working Condition Condition

Actual Cylinder Output Force n=a*f

(Assume Cylinder 50~500mm/s Operation, 50 Cylinder Diameter Cylinder. Theoretical Output At 0.5mpa Pressure Is 100kg, 100kg x0.5 Is Equal To 50kg For Actual Output)

For Static Loads (e.g., Clamping, Low Speed Riveting, Etc.), f2 Has Very Low Resistance, a≤0.7;

For Horizontal Or Vertical Movement Of Cylinder Speed Within The Range Of 50~500mm/s, a≤0.5;

For The Action Of Cylinder Speed Greater Than 500mm/s, f2 Has Great Influence, And a≤0.3.

 

For Example, We Estimate Some Occasions Need To Choose a Cylinder Diameter φ 40mm Cylinder, This Is The Bottom Line, But There Is No Need To Say, Give a Safety Factor, And Then Choose a "Accurate" Cylinder Diameter, The Actual Practice, Should Be Based On Various Considerations, May Choose Cylinder Diameter φ 50mm Or φ 63mm Or φ 100mm

The Diameter Of The Cylinder Is Determined According To The Load Size, Running Speed And Working Pressure

(1) Determine The Relevant Load Weight: Load Conditions Include Workpiece, Fixture, Guide Rod And Other Movable Parts Of The Weight.

(2) Selected Air Pressure: Compressed Air Pressure Of The Supply Cylinder

(3) Direction Of Action: Determine The Direction Of Cylinder Action (Up, Down, Level)

Standard Single Rod Cylinder Theoretical Output Force Meter


Two Rod Cylinder Theoretical Output Force Table


Table Of Horizontal Load And Torque Force Of Three-Bar Cylinder

RIH Brand Strength For Pneumatic Cylinder

Yueqing Right Pneumatic Co., Ltd.Is A Manufacturer Of Pneumatic Products (Pneumatic Execute Components&Pneumatic Control Components&Pneumatic Parts&Accessiories&Air Source Treatment Components) With Well-Equipped Testing Facilities And Strong Technical Force.

With A Wide Range, Good Quality, Reasonable Prices And Stylish Designs, Our Products Are Extensively Used In Automation Equipment, Machine, Building And Other Industries.

Our Pneumatic Cylinder Are Widely Recognized And Trusted By Users And Can Meet Continuously Changing Economic And Social Needs.

We Welcome New And Old Customers From All Walks Of Life To Contact Us For Future Business Relationships And Mutual Success!